多行文本内容元素

富文本内容绑定数据后可解析HTML语言内容

The crusher is a new model for the pretreatment process in the process of making granular oil from soybeans, peanuts and other granular oils. Through the crushing of granular oil by this machine, the rolling effect can be significantly improved, the quality of the embryo film can be guaranteed, and the oil yield and productivity can be improved. This machine according to market research our company's independent innovation research and development, design four-roller three-mill crusher, with small size, high output, crushing particle size uniform, low power consumption and other advantages, but also has small footprint, compact structure, simple operation, flexible and reliable, convenient maintenance and other characteristics.

The crusher is a new model for the pretreatment process in the process of making granular oil from soybeans, peanuts and other granular oils. Through the crushing of granular oil by this machine, the rolling effect can be significantly improved, the quality of the embryo film can be guaranteed, and the oil yield and productivity can be improved. This machine according to market research our company's independent innovation research and development, design four-roller three-mill crusher, with small size, high output, crushing particle size uniform, low power consumption and other advantages, but also has small footprint, compact structure, simple operation, flexible and reliable, convenient maintenance and other characteristics.
The technical advantage
structure of the crusher: the rotation direction adjustment of the root roller reaches four rollers and crushes three times, so that the crushed matter can achieve an effect.
Transmission part: the motor is directly connected to the crushing roller through the elastic coupling, and then the speed is reduced by the gear, so as to realize the differential operation of the fast and slow roller and improve the transmission efficiency.
Fine-tuning part: eliminate the micro-moving gap of the crushing roller through worm gear and lead screw and double nut, and use butterfly spring top tightening technology to ensure the crushing pressure, so that one roller is fixed, and the roll pitch of the three rollers is adjusted arbitrarily;
Tile seat part: the use of building block superimposed arrangement and dovetail guide slide adjustment roller pitch to ensure the stability and reliability of the bearing seat.
Base part: integral frame structure to ensure the smooth operation of the whole machine;
Feeding part: using forced feeding and homogenization device to improve production efficiency;
Magnetic separation part: multi-level magnetic separation device is adopted to avoid the damage of the roll on the impurities of raw materials;
Model part: design, small footprint, easy to operate, beautiful and generous.

crusher

Advantages of crusher equipment:
1. Fully enclosed structure, shell, front and rear (upper and lower) door panels and protective cover using high-quality carbon steel plate, front and rear and both sides with heat dissipation net;
2. The frame supporting the roller is made of cast steel material, which is processed and finished by aging to ensure sufficient strength and rigidity, so as to ensure the stability and reliability of the tooth roller operation, and ensure the output and life.
3. The crushing roller bearing adopts domestic brand products, which have low noise, stable operation and long service life.
4. The pulley adopts the design of the tensioning sleeve, which is easy to disassemble;
5. The moving and fixed crushing rollers adopt standard independent bearing supports, which are quick to disassemble and maintain, and convenient to operate and maintain;
6. Feeding device: the material is evenly and continuously fed into the tooth roller for crushing.
7. Material blocking and magnetic separation device: the advanced four-link mechanism is adopted to adjust the amount of material and clean up the debris on the magnet, which is very convenient;
8. Distance adjustment device: the turbine worm digitally adjusts the roll spacing, so that the moving roller and the fixed roller can never touch;
9. Lubrication system: the lubrication port of the tooth roller bearing of this machine is outside the protective cover, and it is very convenient to adopt centralized lubrication;
10. The machine adopts two pairs of rollers above and below to work, and the main drive is equipped with a Siemens motor 90KW;
11. No electric control cabinet.