多行文本内容元素

富文本内容绑定数据后可解析HTML语言内容

It is very important that the crusher adopts a proper anti-vibration foundation, and the anti-vibration measures of the crusher are also very necessary. When the crusher must be placed on the floor, it is necessary to design the foundation, take measures to isolate vibrations and check the calculation results. To avoid the possibility of vibration of the crusher.

It is very important that the crusher adopts a proper anti-vibration foundation, and the anti-vibration measures of the crusher are also very necessary. When the crusher must be placed on the floor, it is necessary to design the foundation, take measures to isolate vibrations and check the calculation results. To avoid the possibility of vibration of the crusher.

The crusher should be inspected and maintained regularly. Usually, if some small parts are slightly damaged, we are not easy to find, sometimes there may be a slight vibration, we are not easy to find, but when the time is late, we need to strengthen the maintenance and repair of crusher parts, especially the repair and maintenance of movable cone and migraine sleeve parts.

We know that in the work of the crusher, electrical energy is converted into kinetic energy, and kinetic energy also contains a part of thermal energy, so the heat of the engine is normal, but it is assumed that overheating will affect the operation of the equipment, if it exceeds a certain level. So what do we do to avoid this?

crusher

It is very important that the crusher has a proper shockproof foundation

1. Firstly, when buying a crusher, its type must match the motor. Assuming the size of the motor, shortcomings such as motor heating or even combustion are prone to occur. Secondly, good equipment is better. A step in performance; Falling or wear of other fan blades can also cause the motor to heat up. At this time, it is necessary to check whether the fan blades of the motor have fallen or worn, and find the problem in time. Secondly, the motor power of the device is too large. The wind speed is too high, and it is too late to blow out the material outlet again under strong wind, resulting in a low output value. Repeatedly returning to the furnace and repeatedly crushing the material can cause the motor to heat up.

2. Open circuit and closed circuit: In production, this cycle is divided into closed circuit and closed circuit. The former is called the sieve before crushing, and the latter is called the sieve after crushing. In actual production, it can be turned on or off according to production needs.

3. Load: The operation process of the crusher is carried out in a closed loop. Increase the discharge outlet and increase the cycle load. The shape of the stone will improve. In the whole process, due to the increase of cycle load, the wear of the system equipment increases, but when the discharge port increases, the load of the main crushing motor can be reduced, and the shape of the final material particles becomes better. Therefore, the regulation of cyclic loads is very important in production.

4. One point is the feed size: Regarding the crusher, the standard size of different types or types of feed that can be processed is different. Assuming that the feed amount is not suitable, the discharge quality will not reach the standard phenomenon. Therefore, the size of the feed should meet the requirements of the production equipment.

Do not allow large pieces of ore and uncrushed material to enter the crushing chamber. Although there is a good steel maintenance system inside the crusher, the aggressiveness of these uncrushed materials will not only affect the output quality, but also increase the crusher's workload, which can easily lead to crusher rupture. It can also damage attachments and create noise.