Heating method and speed control system of wire drawing machine

Release Time:

Dec 11,2020

多行文本内容元素

富文本内容绑定数据后可解析HTML语言内容

The wire drawing machine is used for ordinary plastic wire drawing machine with high requirements for wire drawing. The entire system is more complex, and the control equipment requires coordination between the various motors. There are many ways to heat the wire drawing machine, some use resistance wire heating, some use electromagnetic heating.

The wire drawing machine is used for ordinary plastic wire drawing machine with high requirements for wire drawing. The entire system is more complex, and the control equipment requires coordination between the various motors. There are many ways to heat the wire drawing machine, some use resistance wire heating, some use electromagnetic heating.

Among them, resistance wire heating is equivalent to heating using heat transfer. This is because the iron sheet is heated and the heat is transferred into the barrel. In this process, part of the heat is consumed on the way, while the other part is dissipated into the air, resulting in a waste of thermal energy, which is equivalent to the waste of electrical energy.

The function of electromagnetic heaters is to heat plastic machinery and save energy. It can completely replace the old resistance heater. The main purpose is to wrap a layer of thermal insulation cotton on the barrel, which can reduce heat consumption, and then wrap it on the insulation pad. One layer of electromagnetic heating coil. When the wire drawing machine is energized, the iron molecules in the barrel run relatively strongly, and the barrel generates heat. Therefore, this method is more energy-efficient and efficient than traditional methods. Changing from the conventional resistance type to the current electromagnetic heating type also saves about 30% of electrical energy.

Wire drawing machine

Speed control is high on wire drawing machine systems, which can provide very precise and lubricated linear speeds. Four servo motors were selected for control, which satisfies real-time interaction between data and real-time data exchange between each set of axes.

In order to ensure the locality of the lateral lines of the trajectory according to the algorithm, it is necessary to quickly calculate the lines of the lines. The calculation of the drive itself, i.e. the wiring of the autonomous motor, greatly saves the line direction of the traditional wire drawing machine control system. After the calculation is sent to the drive due to the time delay, the guaranteed wire can minimize the delay through the manipulator.

 

Related News

DBKG40*100 blade shelling machine successfully developed

DBKG40 knife plate shelling machine is based on cottonseed processing industry needs more than 60% of high protein products and independent research and development of a replacement product, this product performance is stable and reliable

May 14,2019

YYPYFP coffee bean embryo rolling machine

The structure of the coffee bean embryo rolling machine is more scientific and reasonable, and the operation is simple and fast. It can press coffee beans, wheat, barley, soybeans, etc. into thin sheets or crush them into small particles for use in the food industry, or further ferment or brew them. It is applied in industries such as chemical engineering, brewing, catering, beer pharmaceuticals, etc., and can also be used for shelling and peeling of other hard shelled materials such as spices. It is an ideal processing equipment for small grains.

May 14,2019

LZBPBG60X100 Successful development of Lingzhi spore powder wall breaking machine

This model is the latest research and development of our company, and is the first and most advanced product at home and abroad. This product has high wall breaking efficiency, large daily wall breaking amount, convenient operation

May 14,2019

Solemn Declaration on Trademark Infringement by Detai

Attempt to use the above intellectual property rights to engage in improper or even illegal deceptive acts. In this regard, our company solemnly warns the majority of users and friends, in order to be able to protect their legitimate legitimate rights and interests, purchase and use high-quality equipment and get quality services, to avoid unnecessary economic losses, hereby declare.

Jul 22,2019

YBKG Toothed roller shelling machine

The raw materials of the machine have strong adaptability, can be cottonseed, soybean, sunflower seed, peanut, etc. shelling separation or crushing, especially for the linted cottonseed shelling and separation, the process route is simplified, the footprint is small, the whole kernel rate is high, the kernel contains less shell, reduce oil loss, increase the equipment processing capacity, reduce equipment wear, is the key pretreatment equipment in the oil industry.

Jul 22,2019

YTPG peeling machine

It is suitable for warm peeling and crushing of soybeans to accurately achieve peeling effect and crushing particle size. The corresponding granular oilseed material is crushed, and the oil seed size requirements before pressing are accurately completed, and the machine output greatly meets the needs of users of different scales.

Jul 22,2019

Products Category

Contact

Tel：13889563616（Manager Zhang）
Email：detailiangji@163.com

Add：No. 999 Sanhuan Street, Zhuanghe City, Dalian, Liaoning Province

Free Access To Materials

Submit

Opyright © 2023 All Rights Reserved  Zhuanghe Detai Machinery Manufacturing Co., Ltd.   Power by www.ceglobal.cn  SEO  Business License

SAF Coolest v1.2 设置面板FAJSX-ZWVB-SSAXE-AFS

修改浏览器滑块样式： 4px,4px,#f00

无数据提示

Sorry，当前栏目暂无内容！

您可以查看其他栏目或返回 首页

SVG图标库请自行添加图标，用div包起来，并命名使用