Zhuanghe Detai Machinery Manufacturing Co., Ltd.

Manufacturer of peanut shelling machine: Operating requirements for peanut shelling machine

Release Time:

Dec 03,2020

多行文本内容元素

富文本内容绑定数据后可解析HTML语言内容

The peanut shelling machine produced by the shelling machine manufacturer brings convenience to farmers, but many farmers who are new to this machine still do not know much about it. It is inevitable that there will be some improper operations during use, which will not only increase the performance loss of the machine, but also reduce the working efficiency of the machine to a certain extent. In fact, as long as two requirements are met when using, the above problems can be avoided. Let's take a look at these two requirements!

The peanut shelling machine produced by the shelling machine manufacturer brings convenience to farmers, but many farmers who are new to this machine still do not know much about it. It is inevitable that there will be some improper operations during use, which will not only increase the performance loss of the machine, but also reduce the working efficiency of the machine to a certain extent. In fact, as long as two requirements are met when using, the above problems can be avoided. Let's take a look at these two requirements!

Shelling machine

Peanut shelling machine operation requirements

(1) Requirements for peanut shelling.

There should be no hard impurities such as iron and stones in the peanuts, otherwise the peanuts will be destroyed, causing waste, and the machine may malfunction. If there are more peanut kernels in the peanut shell, the baffle of the fan should be adjusted to increase the amount of blowing.

(2) Requirements for peanuts (peels).

Actually, not all peanuts can be put directly into the machine for peeling. Peanuts must be wet and dry, too dry or too wet will affect the efficiency of the machine and the crushing rate. To make it dry and moist, the following methods can be used: first, shelling in winter. Before peeling, evenly spray about 50 kg of warm water on 10 kg of peel, then cover it with plastic film for about 10 hours (in other seasons, plastic film can be used for 6 hours), and then dry in the sun for about 1 hours 1 hour peel . The second method is to immerse the dried peanuts (skins) in a large pool, remove them immediately after soaking and cover them with plastic film for about <> day, then dry them in the sun and then peel them when wet and dry .

The above are the operation requirements of the peanut shelling machine. It can be seen that there are requirements not only for the machine itself, but also for peanuts. Therefore, farmers who are new to this machine must pay attention to all aspects to perfectly play the role of this machine!